NoMachine Download

Free remote desktop for everybody


NoMachine for Linux - armv7hl

Version: 5.3.10_1
Package size: 36.64 MB
Package type: TAR.GZ
MD5 signature: 6bfba7b7d0ebac9e2a93acfa94db6846
For: Raspberry Pi3 (Broadcom BCM2837) running Raspbian Jessie, Raspberry Pi2 (Broadcom BCM2836) running Fedora 21/Ubuntu 14.10 (Linaro 15.01)/Debian GNU Linux 8.0 Jessie, Banana Pi (Allwinner A20) running Ubuntu 14.04, Radxa Rock (Rockchip RK3188) running Ubuntu 13.04/Linaro 13.09, BeagleBone Black (AM335x 1GHz ARM; Cortex-A8) running Ubuntu 14.04
Please note that NoMachine for Linux ARM software is in Alpha status.

Although your ARMv7 device may not be listed here, we encourage you to try the packages. Please consult the installation and configuration notes about Linux for ARM packages for more details.

Downloading and Installing

TAR.GZ version
  • Click on Download and save the TAR.GZ file in the /usr directory.
  • Extract the TAR.GZ archive by running from command line:

      $ sudo tar zxvf nomachine_5.3.10_1_armv7hl.tar.gz

  • Install NoMachine by executing:

      $ sudo /usr/NX/nxserver --install
If you don't have the sudo utility installed, log on as superuser ("root") and run the command without sudo.
NOTE: click here for detailed instructions on how to install the NoMachine packages.

Recommended System Requirements

The software is designed to work on computers with minimal HW requirements. Although the software may work with inferior CPUs or reduced RAM, for best performance NoMachine recommends you match the listed requirements.
  • ARMv7 SoC with NEON extension, Linux for ARMv7 "hard float" (armhf/armv7hl) distribution
  • 512 MB RAM
  • 68 MB free disk space
  • Network connection (either a LAN, or Internet link: broadband, cable, DSL, etc.)