Error: No protocol found for IP communication.

Forum / NoMachine for Windows / Error: No protocol found for IP communication.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #12394
    barik
    Participant

    We are getting the following error on Windows 7 x64 with NX 5.1.44 free version.

    Info: Server started with pid 4156 on Mon Sep 19 18:43:31 2016.
    Info: Listening for connections on any interface on port 4000.
    Info: Accepting connections from any host with encryption enabled.
    4156 4160 18:43:31 601.638 Socket: WARNING! Can’t create any local socket.
    4156 4160 18:43:31 601.638 DaemonServerApplication/DaemonServerApplication: ERROR! No protocol found for IP communication.
    Error: No protocol found for IP communication.
    4156 4160 18:43:31 601.638 DaemonServerApplication/Threadable: WARNING! Aborting threadable 0x0071da98.
    4156 4160 18:43:31 601.638 DaemonServerApplication/Threadable: WARNING! Error is 159, ‘Protocol family not supported’.
    4156 4160 18:43:31 601.638 System/System: Abort called for system at 0x6a69dbc0.
    4156 4160 18:43:31 601.638 System/System: Error is 159, ‘Protocol family not supported’.
    4156 4160 18:43:31 601.638 System/System: ERROR! Killing the current program.

    With the error, the NX service keeps being set to stop.
    This is on a Windows 7 64-bit machine running NX 5.1.44_1. Doesn’t seem to matter which port we are using. What does this error mean?

    #12533
    Britgirl
    Participant

    We’ve not been able to reproduce this problem so we are sending you a debug package to investigate further. Check your inbox for emails from our keymaster.

Viewing 2 posts - 1 through 2 (of 2 total)

Closed because the user did not provide further feedback. Please notify us if you confirm that it is resolved or open a new topic if you have the same problem.